Technical Specifications
Frequency Range (-10dB) (1) 70Hz - 54kH Back can
System Sensitivity (1W @1m) (2) 89dB (1W = 2.45V for 6W)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 105 degrees
Directivity Factor (Q) 5.9 averaged 1kHz to 6kHz
Directivity Index (DI) 6.9 averaged 1kHz to 6kHz
Rated Maximum SPL 107dB (average), 113dB (peak)
Power Handling (3) Average: 60W, Programme: 120W, Peak: 240W
Recommended Amplifier Power 120W @ 8W
Nominal Impedance 8 ohms
Transformer Taps 70V: 30W/15W/7.5W/3.75W/ OFF & low impedance operation, 100V: 30W/15W/7.5W/OFF & low impedance
Crossover 2kHz - 2nd order LF, 2nd Order HF (with Dynamic HF protection)
Transducers Specifications
Low Frequency 130mm (5.00") Dual Concentric constant directivity driver with multi fibre paper pulp cone
High Frequency 19mm (0.75") titanium dome with neodymium magnet system
Physical Specifications
Enclosure Back can: Zinc plated steel, Baffle: Reflex loaded UL 94V-0 rated ABS, Grille: Steel
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design Security toggle clamp
Back Can Options Separate back can for Pre Installation
Cable Entry Options Cable clamp & squeeze connector for conduit up to 22mm
Conduit Knockouts 3 Sets of horizontal positions 19 / 22 / 28mm (0.75” / 0.87” / 1.10”)
Connectors Removable locking connector with screw terminals with "loop through" facility
Safety Agency Ratings (pending) UL-1480, UL-2043, CE
Included Accessories C Ring, tile bridge, paint mask, cutout template, grille
Optional Accessories Plaster (mud) ring
Dimensions Bezel diameter: 210mm, Back of Ceiling Surface to Rear of Back Can: 136mm (5.40")
Hole Cutout Diameter 190mm (7.50")
Weight (ea.) 9 lbs (4.08 kg)