Specification
AD-C6T
Effective frequency range1
63 Hz – 20 kHz
Rated noise power / voltage2
60 watts / 31 volts (rms)
Sensitivity [dB]3
Sensitivity at 4m, 100V maximum tap
88
TBD
Rated coverage (-6 dB)4
Coverage angle by frequency
Conical coverage
140° conical DMT
500Hz 1000Hz 2000Hz 4000Hz
160° 160° 160° 170°
One-third octave frequency band contribution at full power using 100V maximum tap (Hz / dB)
500 / 57.4; 630 / 57.4; 800 / 57.4
1000 / 57.4; 1250 / 57.4; 1600 / 57.4
2000 / 57.4; 2500 / 57.4; 3150 / 57.4
4000 / 57.4
Directivity factor (Q)
6.5
Directivity index (DI) [dB]
8
Maximum continuous SPL [dB]5
106
Maximum peak SPL [dB]5
112
Nominal impedance [ohms]
16
Recommended amplifier
120 watts
Transformer taps / impedance
16Ω (in bypass setting)
7.5W (70V); 15W (100V) Tap: 667Ω
15W (70V); 30W (100V) Tap: 333Ω
30W (70V); 60W (100V) Tap: 167Ω
60W (70V); N/A (100V) Tap: 83Ω
LF transducer
165 mm [6.5 in] weather resistant paper cone woofer
HF transducer
25 mm [1 in] aluminum dome tweeter
Input connector type
Euroblock connector with parallel output
Enclosure material
ABS baffle on powder coated steel back can
Grille material
Powder coated steel
Ingress protection
IP-54
Operating environment
Designed for indoor use
Operating temperature range
-20 to 50° C [-4 to 122° F]
Cutout dimension
Ø 245 mm [Ø 9.65 in]
Net weight
4.3 kg [9.5 lb]
Product dimensions (Diameter x Height)
Ø 280 x 237 mm [Ø 11.02 x 9.32 in.]
Shipping weight
12.6 kg [27.8 lb] (pair packed)
Shipping dimensions (H x W x D)
330 x 737 x 381 mm [13 x 29 x 15 in] (pair packed)
Included accessories
C-ring and tile rails, rail screws, euroblock connector, cut-out template, tether grille
Optional accessories
AD-MR6 (pre-install mud ring)
AD-CC6 (pre-install conduit cover)
Safety Agency
EN54-24: 2008 type A (No. pending)
UL1480, UL2043, NFPA90, NFPA70 suitable for use in air handling spaces. Transformer UL registered per UL1876, ROHS, C-Tick X000, CE compliant. Baffle meets UL94-V0 and UL94-5VB flammability rating; in accordance with IEC60849 / EN60849 systems.