Specifications:
Configuration: Passive
Low-frequency Transducer: 8" (203 mm) ferrite woofer
High-frequency Transducer: 1.4" (36 mm) neodymium compression driver
Frequency Range*:
- Frequency Response (-6 dB): 61 Hz - 18 kHz
- Useable Frequency Range (-10 dB): 52 Hz- 18 kHz
*All frequency ranges specified refer to measured half-space response (2 pi).
Maximum Output**:
- Calculated Peak Output: 120 dB SPL
- Calculated Continuous Output: 114 dB SPL
**Calculated maximum peak SPL at 1 m, half-space, speaker operating at rated rms power pink noise input, 50 Hz – 20 kHz.
Nominal Coverage: 90° horizontal and vertical
Nominal Impedance: 16 ohms
Power Rating:
- RMS Power Handling***: 200W
- Recommended Max Amp Power: 400 W
***Maximum input power tested in accordance with IEC recommendations; 50 Hz – 20 kHz band limiting, 6 dB signal crest factor.
Sensitivity: 91 dB SPL, 1W/1m
Bass Loading: Ported
Transformer Type: Custom low distortion laminated core, wide bandwidth design
Transformer Taps:
100 V: 16 ohms bypass, 100 W, 50 W, 25 W
70 V: 16 ohms bypass, 100 W, 50 W, 25 W, 12.5 W
Agency Rating: CE, UL 1480 (commercial/professional use) UL 2043 (air handling spaces)
Enclosure Volume AD-C800BB: 18 L (0.64 ft 3)
Connectors:
Back box (AD-C800BB): ceramic block connector inputs and "through" connectors (rated for 400 W max).
Loudspeaker Baffle (AD-C820): 10-pin MATE-N-LOK™ connector and faston connectors.
Mounting Hardware:
Pre-installed, suspended, back box, four vertical mounting straps.
Loudspeaker Baffle: captive, integral Mounting Clamps.
Weight - Net:
- AD-C820: 8 lb (3.6 kg)
- AD-C800BB: 9.5 lb (4.3 kg)
- System Weight: 17.5 lb (7.9 kg)
Dimensions: Diameter: 14.9" (379 mm)
Enclosure only Depth: 8.3" (211 mm)
Enclosure with mounting straps Depth: 11.2" (284 mm)