Technical Specifications
Frequency Response (-3dB) (1) 110Hz - 22kHz
Frequency Range (-10dB) (1) 80Hz - 24kHz
System Sensitivity (1W @1m) (2) 88dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 120 degrees
Directivity Factor (Q) 5.26 averaged 1kHz to 6kHz
Directivity Index (DI) 6.3 averaged 1kHz to 6kHz
Rated Maximum SPL Average: 105dB
Peak: 111dB
Power Handling (3) Average: 50W
Programme: 100W
Peak: 200W
Recommended Amplifier Power 100W @ 6 Ohms
Nominal Impedance 6 Ohms
Transformer Taps (via front rotary switch) 70V: 30W / 15W / 7.5W / 3.75W / OFF
& Low Impedance operation
100V: 30W / 15W / 7.5W / OFF
& Low Impedance operation
Crossover 7kHz inductively coupled
TRANSDUCERS
Low Frequency 100mm (4.00") mineral loaded polypropylene
High Frequency 19mm (0.75”) ICT™ aluminium dome.
PHYSICAL
Enclosure Back Can: Reflex loaded UL 94V-0 rated ABS
Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure
for load bearing safety bond
Back Can Complete with fixed backcan
Connectors Removable locking connector with screw
terminals with "loop through" facility
Hole Cutout Diameter 187mm (7.36")
Dimensions Bezel diameter: 205mm (8.07")
Front of ceiling to rear of pod: 147.6mm (5.81")
Net Weight (ea) 3.05kg (6.72lb)
Included Accessories C Ring, tile bridge, paint mask,
cutout template, grille
Optional Accessories Plaster (Mud) Ring
Clamping Design Min / Max clamping range: 0.0mm (0.0") / 20.0mm (0.79")
Recommended clamp torque: 1.5Nm