TANNOY VQ 85 DF 2 Way Down-Firing Dual Concentric Mid-High Loudspeaker ลำโพง , ตู้ลำโพง , speaker

Specifications

System Type    2-Way Mid/High - Point Source

Frequency Response (-3dB) 1    400Hz - 23kHz

Frequency Range (-10dB) 1    350Hz - 27kHz

Dispersion H x V (-6dB)    80 x 50 degrees

DRIVER COMPLEMENT

MF/HF    Dual Concentric™ Compression driver loaded into a single PSW™ Waveguide

Crossover Frequency    7kHz (passive)

HighPass Filter @ 450Hz DSP Generated

Amplifier Ch2 Output Power (Slave)    800W (programme)

Directivity Factor (Q)    13.4 averaged 1kHz to 10kHz

Directivity Index (DI)    11.3 averaged 1kHz to 10kHz

CONSTRUCTION

Enclosure    18mm (0.71") birch plywood. Vented and internally braced.

Finish    Textured black or white paint

(custom colours on request).

Powder coated perforated steel grille

Connectors    1 x female XLR (input)

1 x male XLR (link)

1 x RJ45 (network in)

1x RJ45 (network link)

1 xNeutrik NL4 (Amp ch2 Output)

1 x Neutrik Powercon

Controls & Indicators    LED on front of cabinet behind grille.

(wink indicator for locating & assigning)

Power LED (blue)

Signal LED (green)

Limit LED (red)

User DSP - defeat switch

Power switch

Fittings    2 x Recessed carrying handles

9 x M10 flying inserts

Dimensions (H x W X D)    460mm x 694mm x 497"

18.11" x 27.32" x 19.57"

Weight     31Kg

ELECTRONICS

Efficiency    >85% typically

Damping Factor    120 ref 8 Ohms

Distortion    <0.05% @ 1kHz -3dB output (22kHz bandwidth)

Input Impedance    5.6kOhms unbalanced, 11.2kOhms balanced

Output Power (Programme)    VQ DF - 800W (limited to 400W)

Slave output - 800W (programme)

Input Sensitivity    1.4V (+5.5dBu)

System Type     Dual channel Class D

DSP SYSTEM

Comms Facilities     Firmware updatable and selected parameters editable

Communications    Serial - RS485 Proprietary message format

Dynamic Range     112dB(A) typical

DSP     3rd generation SHARC

Sampling Frequency     96kHz 24 bit A/D-D/A word length

Format     1 IN - 2 OUT

PSU SPECIFICATIONS

Input Connector    Locking Neutrik Powercon

Voltage Selection     Automatic (115 / 230V, 45 - 65Hz)

Type    High current, high frequency switch mode

Efficiency    >90% typical

Input voltage    100v / 115v / 230v nominal +/-10%

Mains fuse    External

Fuse type    T10AT

Other features    Automatic soft start

Current Draw    115V                    230V

Startup (inrush)    3.5A                     1.9A

idle    1.0A                     0.56A

In PowerSave Mode    

Max    3.5A                     1.7A